AoIP Network Settings Menu
This menu is used to activate or deactivate the connection type and to set the IP addresses for the primary and secondary Ravenna AoIP network using the fields IP address, netmask, gateway, and VLAN. TM devices with AoIP interface can receive audio signals from the network and route it as input signals for measurement. The settings in this menu are independent of the loaded presets so that they are not altered by loading a new preset.
Functions in the left (upper) area
Primary section | Secondary section
• Type
This key is used to select the connection type for the network.
With "Static" selected, IP address, netmask, and gateway, can be entered manually.
With "DHCP" or "Zeroconf" (Zero Configuration Networking) selected, the system will attempt to find a valid assignment automatically in the respective networks.
Options:
|
|
Static | DHCP | Zeroconf
|
Default value:
|
|
DHCP
|
• IP Address
An option for changing settings is only available, if "Static" was connected as connection type. This key is used to manually set a fixed IP address.
With selected "DHCP" or "Zeroconf" types, the field is greyed and displays the automatically assigned IP address. These settings cannot be changed.
• Netmask
An option for changing settings is only available, if "Static" was connected as connection type. This key is used to manually set a fixed address for the netmask.
With selected "DHCP" or "Zeroconf" types, the field is greyed and displays the automatically assigned netmask address. These settings cannot be changed.
• Gateway
An option for changing settings is only available, if "Static" was connected as connection type. This key is used to manually set a fixed address for the gateway.
With selected "DHCP" or "Zeroconf" types, the field is greyed and displays the automatically assigned gateway address. These settings cannot be changed.
• VLAN
This key is used to adapt the tag resp. port for the virtual network to special requirements. According to standard configurations for a Ravenna network, "10" is set as default value for the primary network connection, and "20" for the secondary.
back to top
• Primary
This key is used to select the menu section including the options for setting the primary network connection.
• Secondary
This key is used to select the menu section including the options for setting the secondary network connection.
back to top
