Radar Key Settings Menu

This menu is used to define the keys that will be available in the instrument's and the local Control Bar and to define the routing of the global keyboard.

  

Please note:
The keys shown in this menu do not affect the instrument's appearance directly. Instead of that, they determine whether or not a key will be available in the instrument's specific Control Bar, specific keyboard, or the "Global Keyboard" instrument. All keys switched to "on" in the Control Bar section will appear in the Control Bar of this instrument. All keys switched to "on" in the Keyboard section will appear in the screen keyboard of this instrument. In the "Global Keyboard" section, individual instrument key functions can be assigned to keys defined in the Global Keyboard instrument.

  

 
 


Control Bar section  

All keys set to "on" in this section will be available in the Control Bar of the Radar instrument.

  

• Start
This key is used to resume the measurements of the circular Radar display and the descriptors after they have been paused by the Stop button (see below).

Options:

  

on | off

Default value:

  

on

  

• Stop
This key is used to pause the measurements of the circular Radar display and the descriptors.

Options:

  

on | off

Default value:

  

on

  

• Reset Loudness
This key is used to reset the circular Radar display as well as the numerical loudness values shown in the descriptors.

Options:

  

on | off

Default value:

  

on

  

• Start + R (pulse)
This key is used to start the loudness measurement with a preciding reset. Use the "Stop" or "Pause" key to stop or halt the measurement.

Options:

  

on | off

Default value:

  

off

  

• Start + R (envel)
This key is used to start the loudness measurement for as long as the key is pressed with a preciding reset. To stop the measurement just release the key.

Options:

  

on | off

Default value:

  

off

  

Please note:
This functionality is only available through the GPI port. The on-screen key cannot emulate a latched condition.

  

• Pause
This key is used to halt the loudness measurement.

Options:

  

on | off

Default value:

  

on

  

• Radar Stats
This key is used to toggle the Radar instrument between its normal circular display and a "Statistics" display of various numerical loudness values.

Options:

  

on | off

Default value:

  

on

  

• Speed
This key is used to set the duration of each Radar revolution between 1 minute and 24 hours.

Options:

  

on | off

Default value:

  

on

  

• Resolution
This key is used to set the difference in loudness between each concentric circle in the Radar display between 3 and 12 dB.

Options:

  

on | off

Default value:

  

on

  

 back to top 
 


Keyboard section  

All keys set to "on" in this section will be available in the screen keyboard of this instrument. Using the view function, this keyboard can be positioned and scaled on the screen like an instrument. If all keys are set to "off" here, no specific keyboard for this instrument will be available for screen placement in View menu.

  

• Start
This key is used to resume the measurements of the circular Radar display and the descriptors after they have been paused by the Stop button (see below).

Options:

  

on | off

Default value:

  

off

  

• Stop
This key is used to pause the measurements of the circular Radar display and the descriptors.

Options:

  

on | off

Default value:

  

off

  

• Reset Loudness
This key is used to reset the circular Radar display as well as the numerical loudness values shown in the descriptors.

Options:

  

on | off

Default value:

  

off

  

• Start + R (pulse)
This key is used to start the loudness measurement with a preciding reset. Use the "Stop" or "Pause" key to stop or halt the measurement.

Options:

  

on | off

Default value:

  

off

  

• Start + R (envel)
This key is used to start the loudness measurement for as long as the key is pressed with a preciding reset. To stop the measurement just release the key.

Options:

  

on | off

Default value:

  

off

  

Please note:
This functionality is only available through the GPI port. The on-screen key cannot emulate a latched condition.

  

• Pause
This key is used to halt the loudness measurement.

Options:

  

on | off

Default value:

  

on

  

• Radar Stats
This key is used to toggle the Radar instrument between its normal circular display and a "Statistics" display of various numerical loudness values.

Options:

  

on | off

Default value:

  

off

  

 back to top 
 


Global Keyboard section  

This section is used to assign individual instrument functions to Global Keyboard keys. In this way, one single Global Keyboard key can control functions of several instruments even if they are placed in different Audio Groups. Also, using the Global Keyboard, instrument keys can be controlled externally using the GPIO interface of the TouchMonitor. To assign an instrument key to a Global Keyboard key, first select that instrument key in the "Global Keyboard" section. Then, assign it to one of the available Global Keyboard keys in the "Selection" area.

  

Please note:
The keys in this section will be available only after the "Global Keyboard" instrument was created in the Non-Audio Group before. Also, at least one key must be set to the "Instrument" key function mode in the Global Keyboard instrument's menu.

  

• Start
This key is used to resume the measurements of the circular Radar display and the descriptors after they have been paused by the Stop button (see below).

Options:

  

on | off

Default value:

  

off

  

• Stop
This key is used to pause the measurements of the circular Radar display and the descriptors.

Options:

  

on | off

Default value:

  

off

  

• Reset Loudness
This key is used to reset the circular Radar display as well as the numerical loudness values shown in the descriptors.

Options:

  

on | off

Default value:

  

off

  

• Start + R (pulse)
This key is used to start the loudness measurement with a preciding reset. Use the "Stop" or "Pause" key to stop or halt the measurement.

Options:

  

on | off

Default value:

  

off

  

• Start + R (envel)
This key is used to start the loudness measurement for as long as the key is pressed with a preciding reset. To stop the measurement just release the key.

Options:

  

on | off

Default value:

  

off

  

Please note:
This functionality is only available through the GPI port. The on-screen key cannot emulate a latched condition.

  

• Pause
This key is used to halt the loudness measurement.

Options:

  

on | off

Default value:

  

on

  

• Radar Stats
This key is used to toggle the Radar instrument between its normal circular display and a "Statistics" display of various numerical loudness values.

Options:

  

on | off

Default value:

  

off

  

 back to top