SSA Key Settings Menu

This menu is used to define the keys that will be available in the instrument's and the local Control Bar and to define the routing of the global keyboard.

  

Please note:
The keys shown in this menu do not affect the instrument's appearance directly. Instead of that, they determine whether or not a key will be available in the instrument's specific Control Bar, specific keyboard, or the "Global Keyboard" instrument. All keys switched to "on" in the Control Bar section will appear in the Control Bar of this instrument. All keys switched to "on" in the Keyboard section will appear in the screen keyboard of this instrument. In the "Global Keyboard" section, individual instrument key functions can be assigned to keys defined in the Global Keyboard instrument.

  

 
 


Control Bar section  

All keys set to "on" in this section will be available in the Control Bar of the Loudness Sum instrument.

  

• PSI
This key is used to switch the phantom source indicators of the SSA instrument.

Options:

  

on | off

Default value:

  

on

  

• DMI
This key is used to switch the indicator for the position of the dominant sound event.

Options:

  

on | off

Default value:

  

on

  

• COR
This key is used to switch the additional phase correlation meters.

Options:

  

on | off

Default value:

  

on

  

• LFE
This key is used to activate or deactivate the additional warning display "LFE Phase!". This warning lights up in the lower section of the SSA, if the correlation between any channel and the LFE channel turns to negativ values.

Options:

  

on | off

Default value:

  

off

  

 back to top 
 


Keyboard section  

All keys set to "on" in this section will be available in the screen keyboard of this instrument. Using the view function, this keyboard can be positioned and scaled on the screen like an instrument. If all keys are set to "off" here, no specific keyboard for this instrument will be available for screen placement in View menu.

  

• PSI
This key is used to switch the phantom source indicators of the SSA instrument.

Options:

  

on | off

Default value:

  

off

  

• DMI
This key is used to switch the indicator for the position of the dominant sound event.

Options:

  

on | off

Default value:

  

off

  

• COR
This key is used to switch the additional phase correlation meters.

Options:

  

on | off

Default value:

  

off

  

• LFE
This key is used to activate or deactivate the additional warning display "LFE Phase!". This warning lights up in the lower section of the SSA, if the correlation between any channel and the LFE channel turns to negativ values.

Options:

  

on | off

Default value:

  

off

  

 back to top 
 


Global Keyboard section  

This section is used to assign individual instrument functions to Global Keyboard keys. In this way, one single Global Keyboard key can control functions of several instruments even if they are placed in different Audio Groups. Also, using the Global Keyboard, instrument keys can be controlled externally using the GPIO interface of the TouchMonitor. To assign an instrument key to a Global Keyboard key, first select that instrument key in the "Global Keyboard" section. Then, assign it to one of the available Global Keyboard keys in the "Selection" area.

  

Please note:
The keys in this section will be available only after the "Global Keyboard" instrument was created in the Non-Audio Group before. Also, at least one key must be set to the "Instrument" key function mode in the Global Keyboard instrument's menu.

  

• PSI
This key is used to switch the phantom source indicators of the SSA instrument.

Options:

  

on | off

Default value:

  

off

  

• DMI
This key is used to switch the indicator for the position of the dominant sound event.

Options:

  

on | off

Default value:

  

off

  

• COR
This key is used to switch the additional phase correlation meters.

Options:

  

on | off

Default value:

  

off

  

• LFE
This key is used to activate or deactivate the additional warning display "LFE Phase!". This warning lights up in the lower section of the SSA, if the correlation between any channel and the LFE channel turns to negativ values.

Options:

  

on | off

Default value:

  

off

  

 back to top